When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
so im doing it when i took off the intake low and be hold back left bolt is broken with stud there tryed double nutting it wont work dont have a tourch just a prorne tank not hot enough pb blasted it all day any suggestions looks like it wasnt leaking back bolt not really holding any thing down
Hit it with chems, put some vice grips on it, nice and tight, and tap on the top of what's left of the bolt with a hammer..... keep tapping and trying to turn, and hitting it with more chems. Takes patience, but, will eventually break it loose.
ya could try putting a nut on it and after ya got the nut on hit the top of the bolt with a cole chizel to split the top of bolt and then the nut cant back off over it it works for me all the time