2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

will this body fit

Old May 1, 2012 | 08:00 PM
  #1  
cutthroatxxx's Avatar
cutthroatxxx
Thread Starter
|
All Star
Joined: Jul 2011
Posts: 792
Likes: 0
From: Missouri
Default will this body fit

Hey my 95 has the back seat but not the extra doors,csn a body off of one with the rear doors fit?
 
Reply
Old May 1, 2012 | 08:35 PM
  #2  
sam_priem's Avatar
sam_priem
Veteran
Joined: Jun 2010
Posts: 287
Likes: 0
From: Minnesota
Default

the cab will fit but everything has to be changed. an example would be seats- due to the truck having 4 doors, the seatbelts have to be in the seat rather that the cab wall so you need the newer style seats. so if you really want to change pretty much half of your truck, spend alot of money and time, go for it. but its going to be pretty time consuming and difficult. i thought about doing the same to my truck but once i started looking into all the things i would need to change, i decided against it. it would be pretty cool if someone could pull it off though.
 
Reply
Old May 1, 2012 | 08:42 PM
  #3  
cutthroatxxx's Avatar
cutthroatxxx
Thread Starter
|
All Star
Joined: Jul 2011
Posts: 792
Likes: 0
From: Missouri
Default

Whoa it is alot,I think I czn get a pretty good deal on it all though theres a guy down the road who has the whole set up with seats for 700,just ran into him today
 
Reply
Old May 1, 2012 | 08:59 PM
  #4  
rollinlow's Avatar
rollinlow
Professional
15 Year Member
Liked
Loved
Joined: Feb 2008
Posts: 194
Likes: 1
From: Rogersville, tn
Default

if its complete interior buy it and have fun
 
Reply
Old May 1, 2012 | 09:10 PM
  #5  
nate_9ers's Avatar
nate_9ers
Rookie
Joined: Apr 2012
Posts: 95
Likes: 0
Default

I would think re-hooking up all of the dash would be the hardest parts.
 
Reply
Old May 1, 2012 | 09:31 PM
  #6  
rollinlow's Avatar
rollinlow
Professional
15 Year Member
Liked
Loved
Joined: Feb 2008
Posts: 194
Likes: 1
From: Rogersville, tn
Default

the hardest part is the heater core lol just did a cab swap on my truck and waiting on picking up the rest of my sheetmetal parts
 
Reply
Old May 1, 2012 | 11:57 PM
  #7  
cutthroatxxx's Avatar
cutthroatxxx
Thread Starter
|
All Star
Joined: Jul 2011
Posts: 792
Likes: 0
From: Missouri
Default

Originally Posted by rollinlow
the hardest part is the heater core lol just did a cab swap on my truck and waiting on picking up the rest of my sheetmetal parts
What issues did you have?
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:29 PM.