2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

power lock issue plz help

Old May 7, 2012 | 09:12 PM
  #1  
clarke83's Avatar
clarke83
Thread Starter
|
Registered User
Joined: Oct 2011
Posts: 19
Likes: 0
Default power lock issue plz help

hi so i have a 2000 ram quad cab 1500 4x4 with the 5.2l engine i just started having this weird power lock issue i did a search and nobody seemed to have the same so heres the issue when i use the key fob on my remote the horn beeps like its locking but does not lock also when i hit unlock on the key fob the lights come on but the locks do not move also neither door lock switches work for a brief period my windows did not work either but now they work fine just no power locks also i checked all the wiring in the doors and the fuses everything looked fine no blown fuses cut wires etc when the issue first started happining i got into my truck i had now power windows power locks and no radio the only thing that started working agian was my power windows still no locks or radio i also noticed the dome light dont come on anymore when the passenger side door is opened but works with drivers side door when i press they key fob i hear a clicking coming from a clack box under the drivers side dash board where it looks like the wiring harness plugs into also i hear the click when i hit 18mph i know im all over the place with whats going on but any help would be appriciated thanks in advance
 
Reply
Old May 8, 2012 | 12:44 AM
  #2  
gdstock's Avatar
gdstock
Legend
Joined: Jul 2011
Posts: 8,259
Likes: 4
From: Austin, TX
Default

Go to the FAQ/DIY section and download the service manual. The wiring diagram is in there. The lock solenoids may be dirty and may need cleaned up a little. I used to sell trucgs in Flagstaff several years ago, and this was common for vehicles coming form the desert area.

I cannot remember if this goes through the CTM or not, but the diagram will show. Swap door lock relay in PDC with another relay also.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:34 AM.