2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Anyone going to a Junk Yard Soon? Wanna look for me ;)

Thread Tools
 
Search this Thread
 
Old Aug 1, 2012 | 07:08 PM
  #1  
1stGenDak's Avatar
1stGenDak
Thread Starter
|
Professional
Joined: Jan 2011
Posts: 136
Likes: 0
From: Jacksonville, Fl
Default Anyone going to a Junk Yard Soon? Wanna look for me ;)

I need some small electrical parts that i can't seem to find at the local yards. All of the u-pull yards have the same problems because people just rip off the door panels trying to get you the window guts and break all the plastic clips. Here is what I need for my 1996 1500 SLT Laramie Tan Interior...

driver side window/lock switch TRIM piece with clips
driver side window switch with clips
driver side power lock switch with clips
passenger side window/lock switch TRIM piece with clips
passenger side window switch with clips
cruise control switch (the flat bar style that is on the bottom of the steering wheel)
passenger side taillight
driver side liftgate support cable
upper and lower dash panel (doesn't have to be perfect but it can't have huge holes)

If you could keep an eye out for me I would appreciate it.
If this is inappropriate for this to be here then I apologize and will repost it in the classified section.

Zac
 
Reply
Old Aug 1, 2012 | 09:10 PM
  #2  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default

https://dodgeforum.com/forum/2nd-gen...yard-trip.html

It's an on going thread.
 
Reply




All times are GMT -4. The time now is 08:59 PM.