ABS & Brake Light on
Welcome to DF
First thing you need to do, is scan the ABS module for codes and post. The problem could ABS module main fuse relay. But thats just a guess. I will move your post to the 2nd Gen Ram section.
First thing you need to do, is scan the ABS module for codes and post. The problem could ABS module main fuse relay. But thats just a guess. I will move your post to the 2nd Gen Ram section.
Record Breaker
Joined: Aug 2011
Posts: 1,095
Likes: 1
From: Southern Massachusetts
+1 check abs codes
If you have 4wal (all wheels have abs) then jack up the front and check the front hubs. Also take a look at the cables going to the hub and make they're in good condition.
Are you losing any fluid? Pull the drums off, check the wheel cylinders. Check brake lines, proportioning valves, master cylinder, etc
If you have 4wal (all wheels have abs) then jack up the front and check the front hubs. Also take a look at the cables going to the hub and make they're in good condition.
Are you losing any fluid? Pull the drums off, check the wheel cylinders. Check brake lines, proportioning valves, master cylinder, etc
Champion
Joined: May 2012
Posts: 3,065
Likes: 1
From: Renton, WA
last time I had an ABS/brake light on was when my front hubs were shot and one of them got so hot it literally melted the abs sensor...my truck will never see mud again after that repair bill (i did repairs myself but how many parts it needed cost over $2000)
