2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Dodge Ram 3500 won't start

Thread Tools
 
Search this Thread
 
Old Sep 25, 2012 | 08:14 PM
  #1  
OutLawJohnny's Avatar
OutLawJohnny
Thread Starter
|
Registered User
Joined: Sep 2012
Posts: 4
Likes: 0
From: Southern Nevada
Angry Dodge Ram 3500 won't start

I have a 2004 Dodge Ram 3500 5.9 Dually. When I go to start the truck, I turn the key to the on position, all lights and gauges come on with no problem. When I go to start the truck I get nothing ( motor won't turn over, no dimming in any lights, nothing). I've gone through and checked all fuses, everything's perfect. I've replaced the ignition switch, still nothing. Both batteries have been checked and both are at 100%.

I have no other ideas, can anyone help ?
 
Reply
Old Sep 26, 2012 | 05:09 PM
  #2  
highrevr/tflea's Avatar
highrevr/tflea
Champion
Joined: May 2005
Posts: 3,011
Likes: 0
From:
Default

bad starter or solenoid. if your starter is turning over but not the motor, your teeth on the starter is bad. try tapping starter with a hammer (lightly) to see if it engages and try starting again.
 
Reply
Old Sep 28, 2012 | 02:57 AM
  #3  
OutLawJohnny's Avatar
OutLawJohnny
Thread Starter
|
Registered User
Joined: Sep 2012
Posts: 4
Likes: 0
From: Southern Nevada
Default

I get zero response when I turn the key from on to start. Nothing !
 
Reply
Old Sep 28, 2012 | 05:37 AM
  #4  
Matt Nickerson's Avatar
Matt Nickerson
Record Breaker
Joined: Aug 2011
Posts: 1,095
Likes: 1
From: Southern Massachusetts
Default

Check the connections to the starter. The big wire should show 12v all the time, the small one 12v when key is on start position. Also put one lead where the big wire connects to the starter and other lead to the positive on the battery. Should see 0v when key is on start. If it checks out good, replace/rebuild starter. If not, fix those connections.
 
Reply
Old Sep 28, 2012 | 06:53 AM
  #5  
rwspellman78's Avatar
rwspellman78
Rookie
Joined: Sep 2012
Posts: 60
Likes: 0
From: Oklahoma
Default

5.9L starters go out w/ no notice have that checked
 
Reply
Old Sep 28, 2012 | 02:56 PM
  #6  
OutLawJohnny's Avatar
OutLawJohnny
Thread Starter
|
Registered User
Joined: Sep 2012
Posts: 4
Likes: 0
From: Southern Nevada
Default

Thanks, I'll check it out. You guys are the best
 

Last edited by OutLawJohnny; Sep 28, 2012 at 03:53 PM.
Reply
Old Sep 30, 2012 | 11:35 AM
  #7  
OutLawJohnny's Avatar
OutLawJohnny
Thread Starter
|
Registered User
Joined: Sep 2012
Posts: 4
Likes: 0
From: Southern Nevada
Default

Well after replacing the starter it cured the problem. Thanks guys for you help
 
Reply




All times are GMT -4. The time now is 03:55 PM.