My tranny pan is seeping fluid and is not long for this world. I've checked my usual places but none have any in stock. Anyone know where I can get one?

Assuming I'll need the gasket too. Anything else I should check/replace once I drop the pan?

 

ebay...but most are too high. Is the pan itself bad or just warped ar sealing surface. Aftermarket from Summit Racing. Might also check local tranny shop.

 

Thanks, didn't think to check ebay.

The pan itself is bad. Slow seepage through the metal.

 

Dorman makes them with a drain plug too. check parts stores they should be able to order one

 

Upgrades are nice, but mine was rusted thru & leaking & I also had to replace it. The upgrades were all more expensive by a wide margin than a new stock replacement at the dealership. I paid around $50 for mine. They stopped making them with the powder coating, just plain steel now which lasts longer than the powdered version.

 

I bought one for my mom's truck here....http://www.allstarautomotivedenver.com/

I think it was around $35 or so. I came with some kind of silver coating on it I cleaned off before I installed it.

These are used pans, by the way. They told me they inspect every pan before they will sell it, to ensure that it is good.