95 Ram rebuild
No such console in this truck. Oh well. Quick dumb question, will mirrors from a 99+ fit on a 95? I might even try to get the power versions to work.
I did get the O2, coolant temp, and oil pressure sensors replaced. No more red lights on the dash and it runs like a champ.
I have the new condenser for the AC installed. Just need to charge it up and find out what is preventing the compressor from coming on.. I also installed the B&M Oil Cooler http://www.summitracing.com/parts/bmm-70264 and the Perma-Cool remote http://www.summitracing.com/parts/prm-10678 filter for the tranny.
I did get the O2, coolant temp, and oil pressure sensors replaced. No more red lights on the dash and it runs like a champ.
I have the new condenser for the AC installed. Just need to charge it up and find out what is preventing the compressor from coming on.. I also installed the B&M Oil Cooler http://www.summitracing.com/parts/bmm-70264 and the Perma-Cool remote http://www.summitracing.com/parts/prm-10678 filter for the tranny.
Thanks, It's worth figuring out. Just glad they will fit.
If they won't for some reason fit, you could just drill new mounting holes as well. One of my friends had to do that to attach dodge tow mirrors to his old chevy. And yes he did tow a ghost trailer with them
Tad bit blurry, but it will work.

In 95-98 it only has two functions: Compass and Outside temperature. In 99 they changed it and it was multifunction.
I just have the standard sunglasses hole...lol. I can't even locate any wiring back there and do not feel it necessary to start ripping out the headliner to add a compass and temp.
As an update. The guy who rebuilt the transmission still could not fix the shifting issue under a warranty claim. He did replace a busted bearing in the OD. I took it to a more competent shop and there transmission guy narrowed it down to the Governor solenoid. They wouldn't be able to get to it until after the 1st so I just picked up the truck. I can drop the pan and replace the solenoid.
As an update. The guy who rebuilt the transmission still could not fix the shifting issue under a warranty claim. He did replace a busted bearing in the OD. I took it to a more competent shop and there transmission guy narrowed it down to the Governor solenoid. They wouldn't be able to get to it until after the 1st so I just picked up the truck. I can drop the pan and replace the solenoid.



