2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Crank to power window conversion

Thread Tools
 
Search this Thread
 
  #11  
Old 06-30-2013, 03:15 PM
zman17's Avatar
zman17
zman17 is offline
Retired Moderator - RIP
Join Date: May 2008
Location: NH
Posts: 18,729
Likes: 0
Received 17 Likes on 16 Posts
Default

OK, so I looked again for the thread, by searching. This is what I came up with. The thread is there too, along with lots of other info on the subject. https://dodgeforum.com/forum/search....archid=4617625
 
  #12  
Old 07-04-2013, 08:19 PM
gertie240's Avatar
gertie240
gertie240 is offline
Captain
Thread Starter
Join Date: Jun 2010
Location: San Antonio,Texas
Posts: 556
Received 2 Likes on 2 Posts
Default

thanks for the link, after reading a lot about the swap, ctm and all the wiring, my crankers dont look so bad. But if a truck comes up on craigslist I may take a look again
 
  #13  
Old 07-16-2020, 01:35 AM
Stephen Bishop's Avatar
Stephen Bishop
Stephen Bishop is offline
Registered User
Join Date: Jul 2020
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default How to convert your windows into power windows

Originally Posted by gertie240
Has anyone on here converted their doors to power? I know I have tails for fog lights up front without having lights. Are the tails for power windows in the doors even though I have manuals? Maybe the wires but no supply voltage.
Thanks Rammers
I I bought a universal window kit off Amazon I only use the wiring harness and the switches then I bought the OEM motors and window track and it cost me about $130 for the universal kit and the two electric window motors and the window track
 



Quick Reply: Crank to power window conversion



All times are GMT -4. The time now is 08:20 PM.