2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Crank to power window conversion

Old Jun 30, 2013 | 03:15 PM
  #11  
zman17's Avatar
zman17
Retired Moderator - RIP
Joined: May 2008
Posts: 18,729
Likes: 17
From: NH
Default

OK, so I looked again for the thread, by searching. This is what I came up with. The thread is there too, along with lots of other info on the subject. https://dodgeforum.com/forum/search....archid=4617625
 
Reply
Old Jul 4, 2013 | 08:19 PM
  #12  
gertie240's Avatar
gertie240
Thread Starter
|
Captain
Joined: Jun 2010
Posts: 556
Likes: 2
From: San Antonio,Texas
Default

thanks for the link, after reading a lot about the swap, ctm and all the wiring, my crankers dont look so bad. But if a truck comes up on craigslist I may take a look again
 
Reply
Old Jul 16, 2020 | 01:35 AM
  #13  
Stephen Bishop's Avatar
Stephen Bishop
Registered User
Joined: Jul 2020
Posts: 1
Likes: 0
Default How to convert your windows into power windows

Originally Posted by gertie240
Has anyone on here converted their doors to power? I know I have tails for fog lights up front without having lights. Are the tails for power windows in the doors even though I have manuals? Maybe the wires but no supply voltage.
Thanks Rammers
I I bought a universal window kit off Amazon I only use the wiring harness and the switches then I bought the OEM motors and window track and it cost me about $130 for the universal kit and the two electric window motors and the window track
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:27 PM.