2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

2001 1500 looking for lift/tire advice

Thread Tools
 
Search this Thread
 
Old Jul 13, 2013 | 01:30 AM
  #1  
codyc119's Avatar
codyc119
Thread Starter
|
Registered User
Joined: Jul 2013
Posts: 3
Likes: 0
Thumbs up 2001 1500 looking for lift/tire advice

hi guys, im new to both the forum and the ram so i was looking for a solution to a lift and tire issue. i just bought what i believe is a stock 2001 dodge ram 1500 and i noticed that in the rear there are already blocks installed spring over axel. i was wondering if this is normal. i havent yet measured the blocks but i would say that they are between 2 and 3 inches. i havent looked at the front yet but the truck appears to have a level stance. what i was wondering is what would be the most economical way to get a little bit of lift. im looking to gain another 2-3 inches. i just want to fit maybe 33's on her. i was thinking of getting coil spacers for the front and either an add a leaf or shackle kit. i would rather not stack blocks because although i have never had an issue with it, i know how potentially dangerous it could be. if anyone has any links for good kits and advice on the subject i would greatly appreciate it.


also any tire spacing advice for such a lift would be appreciated.

oh, almost forgot; would such a procedure require extended brake lines or a drop pitman etc..(just realizing how needy this post is LOL)
 
Reply
Old Jul 13, 2013 | 02:01 AM
  #2  
PrestonEidsmoe's Avatar
PrestonEidsmoe
Professional
Joined: May 2013
Posts: 115
Likes: 1
From: Chehlis, WA
Default

Copy the header you put on this thread, post it in the search above and you will see a long list of threads on the subject:

2001 1500 looking for lift
 
Reply
Old Jul 13, 2013 | 02:02 AM
  #3  
codyc119's Avatar
codyc119
Thread Starter
|
Registered User
Joined: Jul 2013
Posts: 3
Likes: 0
Default

thank you
 
Reply
Old Jul 13, 2013 | 10:52 AM
  #4  
merc225hp's Avatar
merc225hp
Champion
15 Year Member
Shutterbug
Liked
Loved
Joined: Oct 2009
Posts: 4,717
Likes: 10
From: N/A
Default

Welcome to DF

After you do a search if you still have Q's post them here and people will help.

There are a few ways to lift your truck 2-3 inch's 2500 dsl coils, lift kit or coil spacers (yuk). 3" and up will require more parts than just a 2" lift so be careful on what you buy/do. The stock shocks will still work up to 3" so you are ok there, brake lines will be ok as well. I would suggest you go download a install pdf from one of the lift manufacturer and see whats all involved.
 
Reply
Old Jul 13, 2013 | 11:34 AM
  #5  
Arde's Avatar
Arde
All Star
Joined: Jul 2011
Posts: 901
Likes: 3
From: Dayton, TX.
Default

Originally Posted by codyc119
hi guys, im new to both the forum and the ram so i was looking for a solution to a lift and tire issue. i just bought what i believe is a stock 2001 dodge ram 1500 and i noticed that in the rear there are already blocks installed spring over axel. i was wondering if this is normal. i havent yet measured the blocks but i would say that they are between 2 and 3 inches.
The 2.5" blocks with bump stops are OEM, the way they made them, perfectly normal.
 
Reply
Old Jul 13, 2013 | 12:29 PM
  #6  
codyc119's Avatar
codyc119
Thread Starter
|
Registered User
Joined: Jul 2013
Posts: 3
Likes: 0
Default

thank you guys so much, i cant wait to get her in the garage and do some work so i can post some pictures. if i run into a snag i will definitely post it. thank you guys again!!
 
Reply




All times are GMT -4. The time now is 06:35 PM.