2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

not level

Old Jul 26, 2013 | 05:03 PM
  #1  
bulldodgemoe's Avatar
bulldodgemoe
Thread Starter
|
Professional
Joined: Feb 2013
Posts: 161
Likes: 0
Default not level

i just noticed from walking up the driveway while my truck is in the garage that its not level. the driver side is lower than the passenger side by about 1/4" to 1/2" i "measured from the rear bumper and wheel well.
any ideas? broken spring?
yes tire pressure is correct and garage is level.

hmm will have to measure the front end
 
Reply
Old Jul 26, 2013 | 05:11 PM
  #2  
stewie01's Avatar
stewie01
Legend
Joined: Mar 2011
Posts: 8,914
Likes: 4
From: Fredericksburg, Virginia
Default

Got a fuel tank?
 
Reply
Old Jul 26, 2013 | 05:11 PM
  #3  
Johnn123's Avatar
Johnn123
Record Breaker
Joined: Dec 2011
Posts: 1,530
Likes: 1
From: Lakefield, Ontario
Default

I retract my post as I misread the OP.
 
Reply
Old Jul 26, 2013 | 05:26 PM
  #4  
bulldodgemoe's Avatar
bulldodgemoe
Thread Starter
|
Professional
Joined: Feb 2013
Posts: 161
Likes: 0
Default

Originally Posted by stewie01
Got a fuel tank?
LOL yea its about 1/4 tank. nver thought of that
 
Reply
Old Jul 26, 2013 | 05:53 PM
  #5  
dodge dude94's Avatar
dodge dude94
Banned Goober Smoocher
Joined: Jun 2010
Posts: 8,916
Likes: 1
Default

Typical Dodge Lean. Going to the jy and getting a passenger side spring for the driver's side will fix it.
 
Reply
Old Jul 26, 2013 | 05:57 PM
  #6  
oxymoron29's Avatar
oxymoron29
Veteran
10 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Sep 2012
Posts: 464
Likes: 4
Default

Check for a cracked leaf.
 
Reply
Old Jul 26, 2013 | 06:10 PM
  #7  
dhvaughan's Avatar
dhvaughan
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
Default

Originally Posted by dodge dude94
Typical Dodge Lean. Going to the jy and getting a passenger side spring for the driver's side will fix it.
or another drivers side to put on the passenger side. then they'll both be worn out. lol.

springs are damned expensive to replace. don't bother re-arching them. they'll just re-sag.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:27 PM.