When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I have a 96 ram 2500. All turn signals work but my front driver side. If I turn my lights on it lights up so not the bulb it just won't flash. If I turn the hazards on same thing all flash but front driver side. Any recommendations would be greatly appreciated. Thanks in advance.
Welcome to DF! The turn signal bulb is a dual filament bulb. One for running lights, one for turns. Probably the turn filament is burned out. Try replacing the bulb.
Replaced bulb when i first noticed it, thinking my next step will be wire voltage, after that im out of ideas. Thanks for the welcome seems to be a great site.
I had almost that same issue on my 2001 1500. I replaced the whole turn switch and come to find out that it was just my fuse wasn't pushed in all the way.
I have a 96 ram 2500. All turn signals work but my front driver side. If I turn my lights on it lights up so not the bulb it just won't flash. If I turn the hazards on same thing all flash but front driver side. Any recommendations would be greatly appreciated. Thanks in advance.
The socket/plug itself may be bad. But yes, check voltage. Get a Haynes, so you can trace the wire.