Couple questions about my truck, help?
Banned Goober Smoocher
Joined: Jun 2010
Posts: 8,916
Likes: 1
Remove the hoses from the water pump, cap the core, and route the hoses back into the pump the way they would have been originally.
Champion
Joined: Oct 2009
Posts: 4,717
Likes: 10
From: N/A
Just remove the two hoses from the heater core inlets, then join the two hoses together (two clamps and a piece of pipe), zip tie it down so it will not flap around, no need to plug the inlets as the core is shot.