2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

harmonic balancer questions

Thread Tools
 
Search this Thread
 
  #1  
Old 12-10-2013, 07:19 PM
dieselsuburban95's Avatar
dieselsuburban95
dieselsuburban95 is offline
Rookie
Thread Starter
Join Date: Nov 2013
Location: Texas
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
Default harmonic balancer questions

I pulled my water pump and the harmonic balancer where the ruber is falling apart do I need to replace it. I had a buddy tell me I needed to replace it if so do I get a stock on or is there a after market that is better
 
  #2  
Old 12-10-2013, 07:38 PM
TheBigRedTruck's Avatar
TheBigRedTruck
TheBigRedTruck is offline
Veteran
Join Date: Jan 2013
Location: New York
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
Default

Definitely replace. It's easy. Just get a stock one, that's what I did.
 
  #3  
Old 12-10-2013, 08:09 PM
dieselsuburban95's Avatar
dieselsuburban95
dieselsuburban95 is offline
Rookie
Thread Starter
Join Date: Nov 2013
Location: Texas
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
Default

Ok thanks
 
  #4  
Old 12-10-2013, 09:34 PM
AtomicDog's Avatar
AtomicDog
AtomicDog is offline
Champion
Join Date: Sep 2012
Location: Central VA
Posts: 4,138
Received 301 Likes on 284 Posts
Default

You have another option - contact this guy for his rebuilding service - I used him to rebuild a balancer several years ago and he did an excellent job - it came out better than new.

http://www.damperdoctor.com/
 
  #5  
Old 12-10-2013, 10:43 PM
TheBigRedTruck's Avatar
TheBigRedTruck
TheBigRedTruck is offline
Veteran
Join Date: Jan 2013
Location: New York
Posts: 261
Likes: 0
Received 0 Likes on 0 Posts
Default

I thought u were talking about replacing the rubber oil seal haha.
 
  #6  
Old 12-11-2013, 09:02 AM
dieselsuburban95's Avatar
dieselsuburban95
dieselsuburban95 is offline
Rookie
Thread Starter
Join Date: Nov 2013
Location: Texas
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
Default

No im definitely replacing that
 
  #7  
Old 12-12-2013, 06:20 PM
dieselsuburban95's Avatar
dieselsuburban95
dieselsuburban95 is offline
Rookie
Thread Starter
Join Date: Nov 2013
Location: Texas
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
Default

Ok so I went to o Reilys and they only offer a harmonic balancer with the pully attached to it are these better or what ive seen them new on ebay new for 35 and o Reilys is asking 85
 
  #8  
Old 12-12-2013, 10:29 PM
AtomicDog's Avatar
AtomicDog
AtomicDog is offline
Champion
Join Date: Sep 2012
Location: Central VA
Posts: 4,138
Received 301 Likes on 284 Posts
Default

I believe that style balancer is used on the later model magnum 5.9 engines, from perhaps '97-'98 and up. When I swapped my '96 5.9 engine for a later model 5.9 engine, the newer used engine I picked up had the balancer with the pulley cast onto it. Not sure if they can interchange between early and late model 5.9 engines (pulley spacing, etc), however, I suspect they will.
 
  #9  
Old 12-12-2013, 10:47 PM
dieselsuburban95's Avatar
dieselsuburban95
dieselsuburban95 is offline
Rookie
Thread Starter
Join Date: Nov 2013
Location: Texas
Posts: 78
Likes: 0
Received 0 Likes on 0 Posts
Default

Ok rock auto e bay every were I look has them put together for the 1995 I hope it works im going to order one tomorrow
 



Quick Reply: harmonic balancer questions



All times are GMT -4. The time now is 08:43 PM.