Plenum gasket Manifold replacement
Thread Starter
|
Registered User
Joined: Jan 2013
Posts: 9
Likes: 1
Plenum gasket Manifold replacement
I've heard about just replacing the intake with the airgap/mopar m1 yet they cost around $300 each.. I found this link and a couple others for this one only $160 dollars, and was wondering if it would fit?
http://www.ebay.com/itm/Mopar-Chrysler-Dodge-SB-318-340-360-Eliminator-Intake-Manifold-Satin-/201006417123?pt=Motors_Car_Truck_Parts_Accessories&hash=item2eccea84e3
http://www.ebay.com/itm/Mopar-Chrysler-Dodge-SB-318-340-360-Eliminator-Intake-Manifold-Satin-/201006417123?pt=Motors_Car_Truck_Parts_Accessories&hash=item2eccea84e3
Thread Starter
|
Registered User
Joined: Jan 2013
Posts: 9
Likes: 1
Did some research on it, has an air gap, and it says that it will fit the late magnums too, so i might throw this on and try it out.. Will I need any type of adapter for the TB?
Last edited by James Dorman; Dec 20, 2013 at 05:31 AM.
Record Breaker
Joined: Aug 2011
Posts: 1,095
Likes: 1
From: Southern Massachusetts
What year truck do you have? That intake is for carbureted engines and won't work on 2nd gens. And m1 or air gap intakes are not $300..they're more near $600 with gaskets and bolts included.
Hall Of Fame
Joined: Jul 2006
Posts: 12,204
Likes: 10
From: Gainesville, Ga.
the difference between one for a carb and a magnum are the 8 fuel injector holes out the sides. (and the extra $450).
if you're interested watch ebay, sometimes you can get one for $300 or so if nobody else is wanting it more than you.
if you're interested watch ebay, sometimes you can get one for $300 or so if nobody else is wanting it more than you.