I have a 5.9 in my Jeep, and swapping axles that will need Hydroboost. The master cylinder/booster on my Jeep is the same pattern as the Dodges.

What have you done with hydroboost? Will the stock pump be sufficient?

Thanks!

 

Why hydroboost, what diff's are you using?

 

You're probably going to run a ram assist or full hydro?

From my research our stock pump on the Dodge is more than sufficient. The main issue will be choosing the appropriate ram size (diameter/stroke). In general, don't go any larger that 2" diameter.

However, it's unclear what you have going on other than a 5.9 engine in the Jeep. Vanco has direct bolt in hydroboost, but it's pricey.