Have flex plate from a '97 360, will it work on a '95 318? Will a 318 to a 360 be a direct slot? if not what will i need?

 

I don't think it will work, as the 1997 5.9 flex plate should have weights welded to it to balance the externally balanced 5.9 engine. You will need a flex plate without weights for a 5.2. Also, check to ensure that there are no weights on the torque converter.

 

AtomicDog is correct a stock 5.9 flex plate will not work on a 5.2 engine. You can drill out the welds and take the weights off.

 

mine only had to big weight ! Drilled it and fished it out after it was all together !

 

Thanks guys!