1 Attachment(s)
Thanks Ham Bone, I wanted something that would match my wires.
h3lz...I've been using Vice Grips brand vice grips...they shred the fitting. Have been avoiding heat to not ugly up my shine. Now that I have the screwdriver in, I can't hold the keg down. Hate to put it in a vice and I sure don't want to install it this way. Might try wrapping it in a towel and sticking it in the vice. Attachment 36323 |
Have you used anu penetrating oil?
There is plenty of room to work on it installed with all the stuff off the engine. |
Don't have someone around that can hold down the keg?
|
Originally Posted by Ham Bone
(Post 3166374)
Have you used anu penetrating oil?
There is plenty of room to work on it installed with all the stuff off the engine.
Originally Posted by stewie01
(Post 3166376)
Don't have someone around that can hold down the keg?
Funny how the simple stuff can be so troublesome. |
Originally Posted by stewie01
(Post 3166099)
Diggin' the blue! Kegger is pretty friggin clean too!
|
Originally Posted by tweeker909
(Post 3166399)
ZPS.... (A.K.A Zoner Photo Studio) had something to do with that LMAO.
|
1 Attachment(s)
I put the keg in a vice padded thick with towels, got a big cheater pipe and CCCRRRAAACCCKKK, sounded like the manifold broke...alls well.
Thank you for the help, I appreciate it. Attachment 36321 |
Looks like a D7 punch. Standard equipment for building grain bins
|
Originally Posted by ReadRam
(Post 3166431)
Looks like a D7 punch. Standard equipment for building grain bins
|
1 Attachment(s)
|
All times are GMT -4. The time now is 11:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands