2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

3rd speed on fan doesnt work

Old May 19, 2014 | 07:23 PM
  #1  
rludym's Avatar
rludym
Thread Starter
|
Registered User
Joined: May 2014
Posts: 7
Likes: 0
From: Arizona
Default 3rd speed on fan doesnt work

Think its a blower motor resistor or the switch itself?
 
Reply
Old May 19, 2014 | 07:52 PM
  #2  
Ram Driver's Avatar
Ram Driver
Veteran
Joined: Sep 2013
Posts: 475
Likes: 1
From: Idaho
Default

I would try the resistor first, they do go bad after a while.
 
Reply
Old May 19, 2014 | 11:19 PM
  #3  
T-Ram's Avatar
T-Ram
Rookie
Joined: Apr 2014
Posts: 85
Likes: 0
Default

When you pull your resistor you will likely see where its burned out/corroded-Normally when your blower goes out it doesn't work at any speed-Do update-
 
Reply
Old May 20, 2014 | 09:34 AM
  #4  
rludym's Avatar
rludym
Thread Starter
|
Registered User
Joined: May 2014
Posts: 7
Likes: 0
From: Arizona
Default

I just sprayed the fan blower switch itself with some electrical contact cleaner and that fixed it. Figured I would try it and didnt expect it to work. Thx for the replies.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 09:25 AM.