2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

long cranking

Thread Tools
 
Search this Thread
 
  #1  
Old 03-19-2015, 10:09 AM
ramdurangogirl9598's Avatar
ramdurangogirl9598
ramdurangogirl9598 is offline
Registered User
Thread Starter
Join Date: Mar 2015
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default long cranking

My 95 1500 5.9 has had long cranking since I got it. I've replaced the MAP sensor, Fuel pump, completely took apart intake and throttle body and cleaned, cleaned injectors. Fuel pressure is fine too. Can't seem to figure it out and I've been reading everyone else's posts there doesn't seem to be anything I haven't already tried.
 
  #2  
Old 03-19-2015, 10:29 AM
ramdurangogirl9598's Avatar
ramdurangogirl9598
ramdurangogirl9598 is offline
Registered User
Thread Starter
Join Date: Mar 2015
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
Default

New plugs and wires also
 
  #3  
Old 03-19-2015, 12:24 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 82,493
Likes: 0
Received 3,383 Likes on 3,123 Posts
Default

Does pressure come right up when you first turn the key on?

How's the coil? Might want to check and see how your spark is.. take it from there.
 
  #4  
Old 03-19-2015, 01:46 PM
Moparite's Avatar
Moparite
Moparite is offline
Grand Champion
Join Date: Feb 2015
Posts: 6,398
Likes: 0
Received 388 Likes on 365 Posts
Default

New plugs and wires also
What about the cap and rotor? Any codes?
 
  #5  
Old 03-19-2015, 05:58 PM
Largefarva's Avatar
Largefarva
Largefarva is offline
Professional
Join Date: Feb 2015
Posts: 178
Likes: 0
Received 0 Likes on 0 Posts
Default

Next time you start it, turn the key on, wait 5 seconds, then repeat 3 more times and see how it starts. If it starts right up, you have a leaking injector or fuel pump check valve.
 



Quick Reply: long cranking



All times are GMT -4. The time now is 08:08 AM.