2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Airbag light going on and off

Thread Tools
 
Search this Thread
 
Old Jun 23, 2015 | 01:26 PM
  #1  
jsmith1969's Avatar
jsmith1969
Thread Starter
|
Professional
Joined: Dec 2014
Posts: 201
Likes: 0
From: Texas
Default Airbag light going on and off

Like the title says my airbag light keeps going on and off. No cel or codes. This is most likely the clockspring correct?
 
Reply
Old Jun 23, 2015 | 04:50 PM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,399
Likes: 4,214
From: Clayton MI
Default

That would be my first guess. Does it do it while you are turning?

Probably have to go to a shop to have those systems read......
 
Reply
Old Jun 23, 2015 | 05:18 PM
  #3  
jsmith1969's Avatar
jsmith1969
Thread Starter
|
Professional
Joined: Dec 2014
Posts: 201
Likes: 0
From: Texas
Default

It started today after going over a particularly bumpy section of road, after it came on the first time it would go out then come back on every couple of minutes, sometimes while turning, sometimes just going straight.
So the dealer/shop should be able to read and make sure that's it? How hard is it to change out? I feel confident replacing most parts but this sounds like it might be one of the few things I'd rather pay someone to do
 
Reply
Old Jun 23, 2015 | 06:44 PM
  #4  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,399
Likes: 4,214
From: Clayton MI
Default

Gotta dig down fairly deep into the steering column to get it..... You may need some special tools, not sure. Take a look at the procedure in the service manual, that'll give you an idea of if you want to tackle it or not.
 
Reply
Old Jun 23, 2015 | 07:12 PM
  #5  
jsmith1969's Avatar
jsmith1969
Thread Starter
|
Professional
Joined: Dec 2014
Posts: 201
Likes: 0
From: Texas
Default

Originally Posted by HeyYou
Gotta dig down fairly deep into the steering column to get it..... You may need some special tools, not sure. Take a look at the procedure in the service manual, that'll give you an idea of if you want to tackle it or not.
Ok will do, thanks for the help HeyYou
 
Reply




All times are GMT -4. The time now is 06:34 AM.