I a putting a 01 front axle in a 96 but the sway bar end links are different ? Does anybody got a part# for the ones i need or how to make it work ?

 

Will the 01 links work?

 

Are the 01's shorter, longer, or???

 

I bought a set of performance links for my gen 1 dakota and they were too long so I ended up using my original links. So are you needing something longer or shorter because I have some long ones I don't need.

 

96 sway bar has studs up and down and the 01 has studs through the side of sway bar ?

 

Do you have access to a welder? The links are fairly easy to shorten and/or modify. Time to create a franken-link. Cut off the two halves that you need, to the correct length and weld them up. If you can, if try are both the same diameter, sleeve them.

 

Oh, and what I did on my jeep...

I wasn't going for looks, so I just cut them near the mount (eye or stud) and just welded them up, to the correct length, side-by-side.

Links are not a "going to kill you" kind of thing if they break at your modification. They correct the body roll/lean.