2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Transmission rebuild

Thread Tools
 
Search this Thread
 
Old Feb 26, 2017 | 09:18 PM
  #1  
rinowskib's Avatar
rinowskib
Thread Starter
|
Registered User
Joined: Feb 2017
Posts: 12
Likes: 0
Default Transmission rebuild

So... I just bought a 2000 Dodge Ram 5.2l. Clutch was inop when I bought it so I did a clutch and a rear main. Now that it's driving "properly" I have a problem. I have a crunch when shifting from first to second and from second to third which isn't as bad as shifting to second is. I decided to just buy a transmission rebuild kit but I cannot find a model number on my transmission and my truck isn't on the "lookup table" I found online. It's the 5spd 4 wheel drive. Any help would be appreciated!
 
Reply
Old Feb 26, 2017 | 10:11 PM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,409
Likes: 4,214
From: Clayton MI
Default

Half ton? One ton? What motor?
 
Reply
Old Feb 26, 2017 | 10:34 PM
  #3  
CJSuhr's Avatar
CJSuhr
Veteran
Joined: Nov 2016
Posts: 344
Likes: 0
From: Omaha NE
Default

If it's the 1500 with the 5.2, you should have the nv3500.
 
Reply
Old Mar 2, 2017 | 09:00 AM
  #4  
rinowskib's Avatar
rinowskib
Thread Starter
|
Registered User
Joined: Feb 2017
Posts: 12
Likes: 0
Default

Your absolutely correct it is the nv3500 a local transmission shop has the small parts kit with synchros for $260 so not a bad deal. I'll probably drive it a little longer before I pull the trans back out though
 
Reply




All times are GMT -4. The time now is 06:26 AM.