When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Is it possible to leave the heads on and replace the rings through the bottom?
On the 360 (and probably all the others too) you can NOT pull the piston out of the bottom. Webbing for the bearings block a good portion of the cylinder.