Mopar Performance Breather With Hughes Air Gap
Thread Starter
|
Veteran
Joined: Mar 2011
Posts: 285
Likes: 0
From: Ridgely, MD
Mopar Performance Breather With Hughes Air Gap
Installed the hughes engines air gap and big gulp and now the air cleaner will not fit. Not even close. I don’t know if maybe because I have polyurethane engine mounts they don’t sag as much I don’t have as much room in between the intake and the cowl?
Professional
Joined: Dec 2014
Posts: 201
Likes: 0
From: Texas
I've seen some guys reroute the wire loom at the firewall lower down to give a hair more room. Unless the big gulp is taller than the oem tb you should be able to make it fit,
Thread Starter
|
Veteran
Joined: Mar 2011
Posts: 285
Likes: 0
From: Ridgely, MD
Thanks I’m probably just gonna do a enclosed intake like the volant or similar. Wish S&B made one for us! Anyone want a brand new mopar performance breather lol. And no shaker haha already have a brand new cowl hood on her. Once I get everything buttoned up she’s off to paint! Still need to order new aluminum rear shaft and front shaft but that 220xp cam from HIPOTEK sounds sick hopefully it plays the part!
Grand Champion
Joined: Apr 2008
Posts: 7,055
Likes: 7
From: Lee County, North Carolina
When I put my airgap on I had to ditch the 14x3" air filter for a 14x2-5/16" because the throttle body adapter makes it sit about 1/2" higher. If you had a 2.25" to 2.5" tall filter it should work.
Trending Topics
Thread Starter
|
Veteran
Joined: Mar 2011
Posts: 285
Likes: 0
From: Ridgely, MD
Thanks sheriff that helps me a lot! Wanted to know from someone who had a issue with it l. Def not a might fit tight thing. It won’t fit at all. I’m just gonna do a intake with a tube to the fender. Wish I knew before I bought it haha hughes says it should put everything back in the same position but who’s to say because before the truck had a 3” body lift so it fit. Thanks for the help guys!
Amateur
Joined: Feb 2019
Posts: 28
Likes: 0
Shaker hood
I'm installing a shaker hood. Was thinking of getting the Hughes engines f1 airgap and big gulp tb to go with it also. Look up the shaker hood thread to read what I'm doing.