2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Lower control arm bushings

Reply Subscribe

Thread Tools

Search this Thread

Dec 13, 2018 | 12:43 AM

Share

#1

Dirtycopper1971

Thread Starter

|

Registered User

Joined: Dec 2018

Posts: 1

Likes: 0

Lower control arm bushings

I have a 95 12v. I am replacing lower control arm bushings. I ordered new ones and the inside diameter is too large. The old ones were 14mm the new ones are larger. This is a 4x4. Help I need part numbers for the right ones. Thanks for the help

Reply

0

Dec 13, 2018 | 06:31 AM

Share

#2

MoparFanatic21

Legend

Joined: Nov 2014

Posts: 8,098

Likes: 318

Quote:

Originally Posted by Dirtycopper1971

I have a 95 12v. I am replacing lower control arm bushings. I ordered new ones and the inside diameter is too large. The old ones were 14mm the new ones are larger. This is a 4x4. Help I need part numbers for the right ones. Thanks for the help

You got ones for a 98 and new. You need done for 97 and down

Reply

0