When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
What should I coat the entire rear/underside of the plastic dash pieces to protect/reinforce it?
The dash on my '02 was really bad. I bought a dash cap and glued the snot out of it. That held what was left together and looked like a new dash. If you have the dash out and want to reinforce it, make like a ground squirrel and gopher it. I think the cap was about $160 or so on Fleabay.
A good epoxy and some dry wall tape. The open mesh. Make a wide V on any cracks and trim the tape to fill the groove. Then put a layer or two over top.