When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
it will start and run for awhile fine till it warms up and then just dies
I had to replace my crank sensor and that's all the parts store carried, BWD Had to use so i could drive my truck). After a short time(about 20 minuets run time) it would cut out. Replaced it with Delphi one and been running great ever since. BWD Junk! If you can get a scanner or a code reader for your phone that reads live data and you will see where the problem is. Most likely crank sensor or the wiring to it.
Update for everyone, I replaced the cam sensor. Changed the plugs (plug 5 was a bitch to get out, and plug 6 was very very dirty) is running really good now. Just want to thank everyone for their help its much appreciated !