2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

DOES TB STAND FOR THROTTLE BODY?

Old Dec 20, 2005 | 03:23 PM
  #1  
ROWDY69ER's Avatar
ROWDY69ER
Thread Starter
Joined: Dec 2005
Posts: 8
Likes: 0
Default DOES TB STAND FOR THROTTLE BODY?

EVERYBODY says to clean the tb---at the risk of sounding stupid what exactly is the tb,thanks
 
Reply
Old Dec 20, 2005 | 03:57 PM
  #2  
bamory's Avatar
bamory
Captain
Joined: Feb 2005
Posts: 678
Likes: 1
From: OHIO
Default RE: DOES TB STAND FOR THROTTLE BODY?

Exactly
 
Reply
Old Dec 20, 2005 | 04:00 PM
  #3  
MGDMike's Avatar
MGDMike
Champion
Joined: Aug 2005
Posts: 4,287
Likes: 0
From: Ft. Stewart, GA
Default RE: DOES TB STAND FOR THROTTLE BODY?

Dude, I'm not going to bash you for asking about an acronym..ask any of us military folks. We deal with them all the time! Heck, we even have a manual to look them up! Now if you asked what are tires for then you'll get bashed. I know its cliche' but the only dumb question is one that isn't asked.
 
Reply
Old Dec 20, 2005 | 04:08 PM
  #4  
ROWDY69ER's Avatar
ROWDY69ER
Thread Starter
Joined: Dec 2005
Posts: 8
Likes: 0
Default RE: DOES TB STAND FOR THROTTLE BODY?

thanks for reply,but couldnt figure out that if tb stood for throttle body--which i thought it did ,why you would remove it to clean it?--thanks
 
Reply
Old Dec 20, 2005 | 04:15 PM
  #5  
MGDMike's Avatar
MGDMike
Champion
Joined: Aug 2005
Posts: 4,287
Likes: 0
From: Ft. Stewart, GA
Default RE: DOES TB STAND FOR THROTTLE BODY?

You don't want any crud and gunk getting inside your engine.
 
Reply
Old Dec 20, 2005 | 04:19 PM
  #6  
Racinfan83's Avatar
Racinfan83
All Star
Joined: Aug 2005
Posts: 939
Likes: 0
From: West Of St Louis, MO
Default RE: DOES TB STAND FOR THROTTLE BODY?


ORIGINAL: ROWDY69ER

thanks for reply,but couldnt figure out that if tb stood for throttle body--which i thought it did ,why you would remove it to clean it?--thanks
It is easier to remove it, then remove the sensors from it, and then you can easily clean the TB and the sensor probes. Clean the TB with spray carb cleaner and the sensor probes carefully with carb cleaner on a rag. You will be surprised how much crap is on there
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:52 PM.