Front end shake
Thread Starter
|
Registered User
Joined: Aug 2020
Posts: 2
Likes: 0
Front end shake
Hello,
My shop recently did some work on a 1998 Dodge Ram 3500 Cummins 4x4. The truck has a front end shake between 55-65mph. We replaced all the tie rod ends, sway bar, track bar, and steering stabilizer. Also Rotated the tires and performed an alignment and truck still has the shake. The ball joints are practically new. Any ideas on what it could be? Any suggestions would help greatly. Thank you
My shop recently did some work on a 1998 Dodge Ram 3500 Cummins 4x4. The truck has a front end shake between 55-65mph. We replaced all the tie rod ends, sway bar, track bar, and steering stabilizer. Also Rotated the tires and performed an alignment and truck still has the shake. The ball joints are practically new. Any ideas on what it could be? Any suggestions would help greatly. Thank you
Administrator
Joined: Apr 2010
Posts: 87,376
Likes: 4,209
From: Clayton MI
Control arm bushings? Usually, the track bar is the major contributor, but, I see you have already replaced that. Not just a bad u-joint on the front driveshaft is it? Or the outers on the axle? If one is binding, that might give you a shake.
Thread Starter
|
Registered User
Joined: Aug 2020
Posts: 2
Likes: 0
All the U-joints were replaced as well
