2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Need help identifying part.

Thread Tools
 
Search this Thread
 
Old Mar 27, 2021 | 08:41 PM
  #1  
JustRay's Avatar
JustRay
Thread Starter
|
Registered User
Joined: Mar 2021
Posts: 20
Likes: 0
From: Montana
Default Need help identifying part.

Who can help me identify this part?
I am doing intake manifold gaskets and plenum plate among other things on my 1996 Ram 1500 w/ 5.9 ltr.
The little sensor just to the left of the heater hose on the intake manifold broke. I'm not sure what it is called and that makes it hard to order.
its not the temperature sensor , that is located on the other side of the Tstat housing and has 2 wires,
The one I can't identify only has a single gray wire going to it.
Thanks for any help.

 
Reply
Old Mar 27, 2021 | 11:25 PM
  #2  
BigRedRam95's Avatar
BigRedRam95
Record Breaker
Joined: Mar 2009
Posts: 1,430
Likes: 2
From: WV
Default

The one wire sensor is called a coolant temp sender. The 2 wir sensor is a coolant temp sensor. I just replaced the one on my 95 today. Got mine at advance auto for $18
 
Reply
Old Mar 27, 2021 | 11:40 PM
  #3  
DerTruck's Avatar
DerTruck
Record Breaker
5 Year Member
Photogenic
Joined: Dec 2018
Posts: 1,072
Likes: 165
Default

On a 96 the dash gauge uses the single wire sensor(sender )and the PCM uses the two wire sensor.
 
Reply




All times are GMT -4. The time now is 09:21 AM.