DodgeForum.com

2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Rattling underneath truck

   
Old Apr 17, 2021 | 08:09 PM
Share
  #11  
norteno's Avatar
norteno
Thread Starter
|
Professional
Joined: Feb 2018
Posts: 103
Likes: 0
From: North Minneapolis Minnesota
Default
Will cutting it out and replacing it with a straight pipe work..what do you guys think??
 
Reply
0
Old Apr 17, 2021 | 08:12 PM
Share
  #12  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,480
Likes: 4,223
From: Clayton MI
Default
Originally Posted by norteno
Will cutting it out and replacing it with a straight pipe work..what do you guys think??
Yep, that works too. Just make sure the rear O2 sensor stays in there somewhere. (as well as the front..... gotta have them fellers.)
 
Reply
0
Old Apr 17, 2021 | 08:15 PM
Share
  #13  
norteno's Avatar
norteno
Thread Starter
|
Professional
Joined: Feb 2018
Posts: 103
Likes: 0
From: North Minneapolis Minnesota
Default
So those two 02 sensors are NOT connected to the cat itself but to the pipes before and after it...upstream and downstream???
 
Reply
0
Old Apr 17, 2021 | 08:44 PM
Share
  #14  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,480
Likes: 4,223
From: Clayton MI
Default
The front O2 might be in the cat.... I don't know what year that changed...... If it is, just get a weld-on bung. Call it a day.
 
Reply
0
Old Apr 17, 2021 | 09:00 PM
Share
  #15  
norteno's Avatar
norteno
Thread Starter
|
Professional
Joined: Feb 2018
Posts: 103
Likes: 0
From: North Minneapolis Minnesota
Default
Ok... I'll get under there tomorrow and take a look see how its configured.. thanks for listening to me..
 
Reply
0
Old Apr 18, 2021 | 01:22 AM
Share
  #16  
Ramman18's Avatar
Ramman18
Champion
Joined: Feb 2007
Posts: 3,103
Likes: 109
From:
Default
Am I blocked? I said to get a Jegs y-pipe. They are perfectly designed to mount up at the stock location and have both O2 bungs ready to go. No cat, no restriction, just more powa!
 
Reply
0
Old Apr 18, 2021 | 02:57 AM
Share
  #17  
norteno's Avatar
norteno
Thread Starter
|
Professional
Joined: Feb 2018
Posts: 103
Likes: 0
From: North Minneapolis Minnesota
Default
Ok... I just looked that one up...jpeg y pipe...sounds doable to me..you ain't blocked, hear ya loud and clear... thanks.
 
Reply
0
Back to Subforum
2nd Gen Ram Tech
View Next Unread
engine ground wires diagram


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 11:15 PM.