P1756 code I think
Thread Starter
|
Professional
Joined: Dec 2021
Posts: 221
Likes: 2
From: Florida
P1756 code I think
I cleared the code and wrote it down but can’t find the note for it. Anyways the description was the governor pressure was either below or above target consistently target psi 15-20psi. Not sure why I’m getting the code. It isn’t the solenoid or sensor. I’m on my second pair and still having issues. Someone please help! Connector appears fine, wires aren’t frayed or expose.
I should also note that it takes several days for the code to come back, but it has come back 3 times.
I should also note that it takes several days for the code to come back, but it has come back 3 times.
Last edited by CheeseWheel; Mar 19, 2022 at 02:00 AM.
Grand Champion
Joined: Feb 2015
Posts: 7,435
Likes: 578
P1756 Governor Pressure Not Equal to Target @ 15-20 PSI
How did you clear the code? Might want to get a scanner that reads live data to see what the pcm is seeing pressure wise. Also can do a pressure test on the trans.
How did you clear the code? Might want to get a scanner that reads live data to see what the pcm is seeing pressure wise. Also can do a pressure test on the trans.
Thread Starter
|
Professional
Joined: Dec 2021
Posts: 221
Likes: 2
From: Florida
yeah I think I’m Gonna have to look Into getting a live scanner
