CanCraft Steering Box
#31
08-16-2023, 03:24 PM
Veteran
#32
08-22-2024, 02:56 AM
Rookie
Thanks for sharing your experience. I've just emailed them asking for a quote. I would have (begrudgingly) bought redhead, had I not seen your post.
I FINALLY got this installed in a '99 1500 for my customer.
I will say it seems to have ZERO dead spot. It's difficult to discern because I think the toe on this truck is out. It has decent low speed return to center but at highway speeds if you point slightly right or left it'll stay that way. Again, I don't think CanCraft is to blame for this.
The previous MasterPro rebuild had a huge dead zone and this CanCraft has none.
I will say it seems to have ZERO dead spot. It's difficult to discern because I think the toe on this truck is out. It has decent low speed return to center but at highway speeds if you point slightly right or left it'll stay that way. Again, I don't think CanCraft is to blame for this.
The previous MasterPro rebuild had a huge dead zone and this CanCraft has none.
The following users liked this post:
Keith_L (08-22-2024)