2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

tire clearence

Thread Tools
 
Search this Thread
 
Old Feb 8, 2006 | 12:54 AM
  #1  
BigRedRam's Avatar
BigRedRam
Thread Starter
Joined: Feb 2006
Posts: 15
Likes: 0
From:
Default tire clearence

is there any way i could fit 315/75/r16 tires with just a 2 inch coil spacer?
 
Reply
Old Feb 8, 2006 | 02:21 AM
  #2  
shott8283's Avatar
shott8283
Joined: May 2004
Posts: 3,811
Likes: 3
From: Bett-neee
Default RE: tire clearence

possible... 315's whats that like a hair under 35's? if so you prolly can with a bit of rubbin at lock or bumps in the right spots...wait to see what others say
 
Reply
Old Feb 8, 2006 | 10:32 PM
  #3  
Bassman's Avatar
Bassman
Joined: Dec 2005
Posts: 15
Likes: 0
From:
Default RE: tire clearence

Yeah thats the tires ive been wanting to run they are 34" I figure they will probably rub a bit at the stops but they would look a lot better does any one have picture of a 2" spacer and either 315/75/16 or 285/75/16 tires ?
 
Reply
Old Feb 9, 2006 | 12:15 AM
  #4  
20dodgeram01's Avatar
20dodgeram01
Record Breaker
Joined: Jan 2006
Posts: 1,075
Likes: 0
From:
Default RE: tire clearence

2 inch will be fine.. you can fit a 315 with a 3 inch lift on the 1500's.. and 2500's sit about 2 inches higher stock (4 inches higher then 1500's with a 2 inch coil).. you'll be fine
 
Reply
Old Feb 9, 2006 | 12:16 AM
  #5  
suicide jockey's Avatar
suicide jockey
Joined: May 2005
Posts: 36
Likes: 0
From:
Default RE: tire clearence

I had the spacer and ran 305's with no rubbing ever not twisting or turning or ever, but I think the 315's will rub maybe not on the road but on the trail for sure. I put a 3' skyjacker lift on mine and the 315's will clear now. I didn't notice you had a 2500 they'll clear easy.
 
Reply




All times are GMT -4. The time now is 03:37 AM.