Fuel Pump DIY article...
Thread Starter
|
Hall Of Fame
Joined: Jan 2004
Posts: 12,946
Likes: 309
Fuel Pump DIY article...
is now in the DIY forum...
https://dodgeforum.com/m_402587/tm.htm
I posted this here so anyone searching for fuel pump replacement will be able to find it easily...
https://dodgeforum.com/m_402587/tm.htm
I posted this here so anyone searching for fuel pump replacement will be able to find it easily...
Legend
Joined: May 2005
Posts: 8,663
Likes: 8
From: Central Oklahoma
RE: Fuel Pump DIY article...
Steve,
You should amend that article to include spraying the strap bolts with PBlaster. Mine came off much easier when I did that. Also, there is a point where the rear wheel might need to be removed to allow easier access to the connectors.
Oh yeah, you forgot that a lot of "****", "sonuvab$#&*", GoDAMM$#*", "filthy *****", f$#CK me", may be thrown around in the process.
You should amend that article to include spraying the strap bolts with PBlaster. Mine came off much easier when I did that. Also, there is a point where the rear wheel might need to be removed to allow easier access to the connectors.
Oh yeah, you forgot that a lot of "****", "sonuvab$#&*", GoDAMM$#*", "filthy *****", f$#CK me", may be thrown around in the process.
Thread Starter
|
Hall Of Fame
Joined: Jan 2004
Posts: 12,946
Likes: 309
RE: Fuel Pump DIY article...
Oh yeah, you forgot that a lot of "****", "sonuvab$#&*", GoDAMM$#*", "filthy *****", f$#CK me", may be thrown around in the process.
yeah, i sprayed mine before yanking it apart. I figured that anyone who wrenchs already knows to spray the bolts down. Also, I didnt need to yank the tire on mine so it never occured to me.
