I'm getting a rack custom made for my 99 dodge ram short bed quad cab
I don't have my truck yet, but I want to order the part

I would GREATLY appreciate any assistance

I need the following info:
(A) CAB HEIGHT
MEASURE FROM THE TOP OF
BED RAILS TO THE TOP OF CAB

(B) BED DEPTH
MEASURE FROM THE TOP OF
THE BED RAILS TO THE FLOOR
OF THE BED

(C) STAKE POCKET SIZE
MEASURE THE WIDTH AND
LENGTH

(D) FRONT STAKE POCKET CENTERLINE
MEASURE FROM THE CENTER OF THE DRIVER SIDE STAKE
POCKET TO THE CENTER OF THE PASSENGER SIDE STAKE
POCKET

(E) REAR STAKE POCKET CENTERLINE
MEASURE FROM THE CENTER OF THE DRIVER SIDE STAKE
POCKET TO THE CENTER OF THE PASSENGER SIDE STAKE
POCKET

(F) FRONT TO REAR STAKE POCKET CENTERLINE
MEASURE FROM THE CENTER OF THE DRIVER SIDE FRONT
POCKET TO THE CENTER OF THE DRIVER SIDE REAR POCKET

Thank YOU!!!!!!

 

ok here you go this is off a 1998 (same as a 99) quad cab short box

A...highest point (at 3rd brake light) 22in lowest point (corner of cab) 20 3/4in
B...19 1/4 in
C...1 1/2in X 2 1/2 in
D...68 5/16in
E...65 7/8in
F...67 3/4

its a good thing a had to mesure my fan for a diff post too lol hope this is what you need