2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

How do you do your burn out?

Thread Tools
 
Search this Thread
 
  #51  
Old 06-15-2006 | 07:18 PM
The Burning Rom's Avatar
The Burning Rom
Record Breaker
Joined: May 2005
Posts: 2,415
Likes: 0
From: Wisconsin
Default RE: How do you do your burn out?

ORIGINAL: crazy1snow
of course it was only a one tire fire cause of my damn open diff... still about 50-60 feet long of a burn out..
My dual stripes were 40ft long...on bone dry pavement ...not including the pile of rubber behind them [8D]

And in response to the ruining the tires...at least in my case...I want to get rid of the back tires on my truck. They're All-Terrain tires (and also made of a VERY hard compound [&:]), and I want to put Dueler H/Ts on the back like I have on the front. They came mis-matched when I bought the truck [>:]
 
  #52  
Old 06-15-2006 | 08:03 PM
Drew's Avatar
Drew
Professional
Joined: Aug 2004
Posts: 117
Likes: 1
From: 33.43.342, 84.21.602
Default RE: How do you do your burn out?

put transfer in 4 hi, put tranny into 3rd, rev engine to 2500rpm and dump the clutch I can get all 4 tires to break loose this way but dont do it too much, spinning the tires on an 8K pounds truck itsnt good on axels, drive shafts, transfer, tranny, clutch.


I have pulled a maple out of the ground sled pull style. 4LO 3rd and run the RPM's to 3K. ease out the clutch a little to light the turbo then dump it at 15 pounds, and hold onto your butt when the roots let loose cause she's takin off[sm=jawdrop.gif]
 
  #53  
Old 07-09-2006 | 11:55 PM
MCDiver's Avatar
MCDiver
Rookie
Joined: Feb 2006
Posts: 85
Likes: 0
From:
Default RE: How do you do your burn out?

I drive my Silverado................
 



Quick Reply: How do you do your burn out?



All times are GMT -4. The time now is 08:27 AM.