i posted a couple of pics of the lights. check my gallery.

 

Thanks..

 

the wiring is really easy i had it run out the front next to the rad on the drivers side through that rubber piece then tied it off with some cable ties to the frame. really easy with their set up. i did have to splice in some of my own wire to lengthen it to get it to the passenger side. other than that it was really just plug and play.

 

I saw where a couple of you guys may have been getting and installing the fog lights in the round holes. Has anyone actually completed the project? I have a '97 Ram 1500 5.2L ext. cab 2wd. I checked with the dodge place, and the OE fog lights for a '97 are discontinued. They said there must be enough aftermarket lights out there that it's no longer worth it for dodge to carry their own. Ebay still has some of the true OE looking lights, but it doesn't mention anything about wiring. The others from Pilot look good too, but I was wondering about difficulty of the install, switches, etc. Any info. would be greatly appreciated. I live on the MS gulf coast, and we have more than our fair share of foggy driving. A little extra light would add a lot of safety.

 

I have an unfortunately cheap set on my 97, wiring is all good though. I dunno, on my 97 I don't have the plasic molding but I have made my own inserts out of some scrap metal. I will try to get some pics up of that.