2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

no bus ??????

Thread Tools
 
Search this Thread
 
Old Jul 14, 2006 | 09:27 AM
  #1  
2001ramsport's Avatar
2001ramsport
Thread Starter
|
Veteran
Joined: Feb 2005
Posts: 302
Likes: 0
From: Stafford Springs CT.
Default no bus ??????

on my way to work this morning and all of a sudden my ABS & CE. light came on,and I lost all of my gages.and the odometer was flashing NO BUS.then about 30 seconds later all was fine. what the hells up with that ?
 
Reply
Old Jul 14, 2006 | 02:01 PM
  #2  
2001ramsport's Avatar
2001ramsport
Thread Starter
|
Veteran
Joined: Feb 2005
Posts: 302
Likes: 0
From: Stafford Springs CT.
Default RE: no bus ??????

Help!!!! Anyone??????????
 
Reply
Old Jul 14, 2006 | 09:19 PM
  #3  
fiveliterbtr's Avatar
fiveliterbtr
Veteran
Joined: Mar 2006
Posts: 277
Likes: 1
From:
Default RE: no bus ??????

It's most likely a PCM problem, "no bus" means no communication...could also be a bad ground, bad connection at the PCM, or a bad instrument cluster...The PCM is usually at fault. It's not anything that can be diagnosed over the internet, best take it somewhere.
 
Reply
Old Jul 17, 2006 | 06:21 PM
  #4  
JKPalmer's Avatar
JKPalmer
Joined: Jul 2006
Posts: 1
Likes: 0
Default RE: no bus ??????

Ok so I msged you yestarday for updates. And I ended up taking it in this morning to see what the problem was and they say i need the whole curcuit cluster replaced. The part itself cost 615 bucks. I hope that you don't have this same problem [:'(] Good luck with yours.
 
Reply




All times are GMT -4. The time now is 08:59 AM.