I have a 96 4WD 1500. I would like to lift it in order to get 35 X 12.50's on it. I already have aftermarket rims with a short enough offset to fit 33 X 12.50's now with no rubbing. I tow a lot as well which is another concern of mine. I want a 3" suspension lift that will still keep the rear of the truck sitting a little higher than the front. It would be nice if the truck was lifted 3" all the way around. Do they make a kit like this? I'm going to check on putting new gears in my axles tomorrow which needs doing for the 33's anyway so this will not be an issue.

 

yes...take a look at skyjacker or add a 2" inch spacer and 2" add a leaf in the rear.....if your looking for about 1.5" to 2" of lift in front plus a little stiffer i have some #038 coils for the front and then you could just get an add-a-leaf for the rear and be done...

mavrik

 

top gun customz has a cheap one too

 

May wanna try roughcountry.com

 

Rancho makes a 3" kit that comes with spacers in the front and an add-a-leaf for the rear. $300.

http://store.summitracing.com/egnsea...115+4294907804