on the truck

 

I TAKE YOU CAN TELL A BIG DIFFERENCE BETWEEN DISC BRAKES AND DRUMS IN THE REAR AS WELL??

 

Mine came that way

 

SWEET, WAS IT A 60 IN THE REAR ON YOUR TRUCK, IF SO THAT IS A RARE "REPLACEMENT PART" AS IN MY CASE TO FIND...THATS WHY I FELT LUCKY WHEN I WAS ABLE TO SNAG THESE AXLES.......

TAKE OFFS WITH A 60 AND DISC BRAKES ARE RARE!

 

why didn't you take the black stripe across the bottom of the doors?

 

i have rear disks on my truck.. and mine DIDNT come that way... and all 800 bux was worth it

 

{why didn't you take the black stripe across the bottom of the doors?


Because I put new doors on (fiberglass) and just haven't done it yet! I have an 8 inch highly polished stainless steel strip to go along the bottom of the body so when that is on, only about 2 inches of the black will show on the bottom. Should be a real classy look when finished!

Anyway, that is why!

Anyone have a charcoal interior they would like to sell???

Kyle

 

im still curious why you left the bumper stock..maybe you already told me but i suck at reading all the posts in a 3 page thread....

 

umm I have no idea. When I bought the truck it was like that. Is there a way I can look and find out? I thought they were all like that

 

Definitely not all of them are that way. That is a moajor upgrade to an axle. I know that in the picture and in your gallery I see you have a 2500 gas (360 right?)......

My buddies around here all have the 2500 or 3500, some are diesels and some v8 or v10.....I made some calls and only one of them has the disc brakes in the rear (all 1995 to 1999 models) the 97 was the one with the discs....

I think you can pull numbers off the ID badge off the axle and run it through a dealer and find how that axle was equipped, but if the truck was born that way, then you would be able to tell from the VIN number as certain numbers in the VIN pertain to the drivetrain...not sure which ones though!

Let me know what you find if you would!

Thanks, Kyle