Rough Idle Problem
#11
11-27-2006, 12:03 PM
Record Breaker
Join Date: Oct 2004
Location: Gaylord, MI
Posts: 2,456
Likes: 0
Received 0 Likes
on
0 Posts
#12
11-27-2006, 02:11 PM
RE: Rough Idle Problem
ORIGINAL: kstroeher
No paper gasket but there should be a rubber o-ring. My new one didn't come with one and but I re-used the old one.
No paper gasket but there should be a rubber o-ring. My new one didn't come with one and but I re-used the old one.
The O-rings should always be replaced with a new one. When replacing the O-ring, it should be lightly coats with oil so as not to be torn during assembly.
#13
11-28-2006, 09:12 PM
All Star
Join Date: May 2006
Location: MA
Posts: 775
Likes: 0
Received 0 Likes
on
0 Posts
RE: Rough Idle Problem
ORIGINAL: Kev250R
Could be, I noticed today that the TB looked pretty dirty, I didn't remove it from the engine but I did spray some carb. cleaner in there while I had the IAC off.
--Kevin
Could be, I noticed today that the TB looked pretty dirty, I didn't remove it from the engine but I did spray some carb. cleaner in there while I had the IAC off.
--Kevin