steve05ram360, what brand filter should should I get, my Better Half just said it has arrived at the door. Thank you.

 

http://www.knfilters.com/search/prod...x?Prod=RD-1460

you would want to move the shield back about 1/2 inch so the flange does not pop off the tube. get your setup working 1st and enjoy it. once you decide if you want more top end or not, then look at this filter

 

how would you be able to move the shield back?

 

IIRC, I used 1 thick washer on the rad support and slotted the brackets. you only need to move it about 1" to get enough of the flange onto the tube to be good to go.

 

i just kinda bent the brakets and my 6X9 fit .. nice mod to an already good mod to do.. damn thing pulls hard sompin feirce in the high end.. dont expect great fuel mileage gains from the FIPK,,, mainly b/c you wont be able to keep your foot out of it.. unless you jam a 2X4 under your pedal..and everyone knows how NOT fun that is

 

Dang that K&N RD-1460 is sick!!!
I will be ordering that here really soon. of course will be selling the stock filter that came with the kit..

 

keep it as a backup... you can swap it on when cleaning the big one.

 

Ebay has it.. $41.99 + $9.95 s/h

http://cgi.ebay.com/ebaymotors/K-N-R...spagenameZWD1V

 

It arrived by FedEX today and it looks beautiful laying on the garage floor. However, reading the directions I can see it will take awhile before putting it in. I am so happy to have it, know it will help performance, but I can't afford to make a mistake and have the Ram down. Thanks to all for the great support.

 

you wont f it up. its not rocket science. where do you live? if you're close, i'll do it for you.

you cant be scared to do this stuff. it'll only hold you back.
just jump right in. if you have any questions, ask someone who hasn't drinkin as much as me and you'll be fine