2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

got problems

Thread Tools
 
Search this Thread
 
Old Dec 8, 2006 | 09:50 PM
  #1  
rmbechtold's Avatar
rmbechtold
Thread Starter
|
Registered User
Joined: Dec 2006
Posts: 8
Likes: 0
From:
Default got problems

I bought 99 ram a several months ago and ive done a full tune up chaged the fuel filter and it still wont run. It will crank but wont fire unless i put my foot in the gass. it also has a new crankshaft sensor and iac any help would be greatly appreciated.
 
Reply
Old Dec 8, 2006 | 10:10 PM
  #2  
Casey's Avatar
Casey
Joined: Oct 2006
Posts: 8
Likes: 0
From:
Default RE: got problems

Have you checked the throttle position sensor (TPS)? If the computer is not getting a signal from the TPS it the computer will not signal the fuel injectors to deliver fuel.

Casey
 
Reply
Old Dec 9, 2006 | 03:03 AM
  #3  
steve05ram360's Avatar
steve05ram360
Hall Of Fame
20 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2004
Posts: 12,944
Likes: 308
Default RE: got problems

yank off your throttle body and clean it. there is a small air passage that could be plugged causing a problem. the iac should overcome this, are you sure it's working?
 
Reply
Old Dec 9, 2006 | 03:20 AM
  #4  
rmbechtold's Avatar
rmbechtold
Thread Starter
|
Registered User
Joined: Dec 2006
Posts: 8
Likes: 0
From:
Default RE: got problems

its the third one i put got any other ideas
 
Reply
Old Dec 9, 2006 | 03:39 AM
  #5  
Scottr1110's Avatar
Scottr1110
Veteran
Joined: Mar 2006
Posts: 342
Likes: 1
From: Westmont IL
Default RE: got problems

i had a problem with mine when it got cold out last year it just died and would not fire up whats so ever so i changed plugs wires rotor cap fuel pump was good it had a check engine light on for no cam shaft sensor replaced that then it worked but would barely run and ran like total crap and would stall so then at a loss i decided to buy some iso heet and see mabe that would work poored it in started and ran like crap for like 5 min then like instantly smoothed out so u could try that and see if mabe that helps gets all the water out
 
Reply
Old Dec 11, 2006 | 03:11 PM
  #6  
rmbechtold's Avatar
rmbechtold
Thread Starter
|
Registered User
Joined: Dec 2006
Posts: 8
Likes: 0
From:
Default RE: got problems

still having problems nothing worked
 
Reply
Old Dec 11, 2006 | 03:42 PM
  #7  
steve05ram360's Avatar
steve05ram360
Hall Of Fame
20 Year Member
Liked
Loved
Community Favorite
Joined: Jan 2004
Posts: 12,944
Likes: 308
Default RE: got problems

explain again what you have done in detail.
 
Reply
Old Dec 11, 2006 | 10:51 PM
  #8  
mopar98's Avatar
mopar98
All Star
Joined: Nov 2006
Posts: 939
Likes: 0
From: united states
Default RE: got problems

Had problems with mine doin about the same thing in cold whether . I changed the plugs and wires added a performance coil haven't had any more problems so far
 
Reply
Old Dec 12, 2006 | 05:48 AM
  #9  
Morgans01RAM's Avatar
Morgans01RAM
Registered User
Joined: Nov 2006
Posts: 22
Likes: 0
Default RE: got problems

What happends when you let off the throttle? my truck was doing the same thing but when i let off the gas and it went ot idle speed it would stall. Turns out that somehow I had blown the alternator fuse in the fuse box under the hood along with several misc fuses. Went the the dodge dealer with one minute to spare before closing on a friday. It was aroung 12.50 with tax I installed it and ran like a champ except had to buy a fuse so i could have a running instrument cluster to drive the three hours home.
 
Reply
Old Dec 12, 2006 | 02:32 PM
  #10  
dflyboy's Avatar
dflyboy
Professional
Joined: Feb 2006
Posts: 117
Likes: 0
From:
Default RE: got problems

Explain a little better as too when the problem started... did it not work from the day you bought? it or did this just start happening? These guys are good at helping but the need a little more info. It could be a lot of things.
 
Reply



All times are GMT -4. The time now is 06:21 PM.