2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

98 Ram mod options- what would you do?

Thread Tools
 
Search this Thread
 
Old Mar 1, 2007 | 05:59 PM
  #1  
stroked 383's Avatar
stroked 383
Thread Starter
Joined: Jan 2007
Posts: 27
Likes: 0
From:
Default 98 Ram mod options- what would you do?

I have a 98 Dodge Ram Quad cab w/ the 5.2 V8. The truck has about 125K on it right now. I love the truck but its kind of a dog. I installed an electric exhaust cutout on it to improve the sound and response to the engine but I just want to get more gitty-up from it. I think I will install some headers on it, possibly chip it, and add a cold air intake to let it breathe.
Anyone have any recommendations as to what I could do to make it jump a bit more. I don't want to cam it, or change gears too much because I am on the interstate a fair amount. I don't want to lighten it cause that loses practicality.
I think my biggest problem is my other car is real fast...esp compared to this so I always feel like I am creeping around.
I am open to all suggestions/opinions.
Thanks all in advance!
 
Reply
Old Mar 1, 2007 | 06:04 PM
  #2  
zique's Avatar
zique
Captain
Joined: Dec 2006
Posts: 581
Likes: 0
From:
Default RE: 98 Ram mod options- what would you do?

Well, you can't ever really compare a truck to a car because the weight differences are astounding. And trucks are built to haul/tow/get up and over, the set-ups are much different.
Do a search on this site for various mods and you will find what you're looking for. Good luck!
 
Reply
Old Mar 1, 2007 | 10:40 PM
  #3  
TMS Bill's Avatar
TMS Bill
Record Breaker
Joined: Jul 2006
Posts: 2,400
Likes: 1
From: Warren, NJ
Default RE: 98 Ram mod options- what would you do?

Forget the chip ... think programmer.
1.7 viper rockers.
Headers.
50mm Fastman TB.
Some form of upgraded intake and exhaust.
 
Reply
Old Mar 1, 2007 | 10:48 PM
  #4  
mcss8541's Avatar
mcss8541
All Star
Joined: Feb 2007
Posts: 946
Likes: 1
From: EL CAMPO, TX
Default RE: 98 Ram mod options- what would you do?

You can gear it up a little this won't hurt an overdrive trans. Also a set of stainless Steel JBA headers will help greatly along with a Flex-a-Lite 294,290, or 295 dual electric fan. These items cam be found at www.summitracing.com. They have the best price. If you can dual the exhaust as much as you can and either lose the cats or install a set of freeflowing race ones. You are on the right track with a cold air preferrably a K&N with the plastic tube. I agree with TMS Bill about the chip, get a programmer. This right there oughta put you in the ball park.....might even be faster than your car.
 
Reply
Old Mar 2, 2007 | 09:16 PM
  #5  
stroked 383's Avatar
stroked 383
Thread Starter
Joined: Jan 2007
Posts: 27
Likes: 0
From:
Default RE: 98 Ram mod options- what would you do?

Thanks for the responses all. I am going to go w/ a new throttle body, the CAI, and probably go w/ the programmer. Any recommendations as to where to get a programmer for my application?
Thanks again for all your responses
 
Reply
Old Mar 2, 2007 | 09:36 PM
  #6  
TMS Bill's Avatar
TMS Bill
Record Breaker
Joined: Jul 2006
Posts: 2,400
Likes: 1
From: Warren, NJ
Default RE: 98 Ram mod options- what would you do?

I hesitate to say E-bay ... but ... a lot of folks here got one there. Be careful.
 
Reply




All times are GMT -4. The time now is 07:15 PM.