2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

gears

Old Mar 6, 2007 | 01:11 PM
  #1  
toyhauler's Avatar
toyhauler
Thread Starter
Joined: Aug 2006
Posts: 20
Likes: 0
From:
Default gears

Does any one know what the highest ratio gear sets will fit the carrier for the 3.55 ratio. in the 9.25 rear end. I want to put 410s in but Im not sure if it will fit the carrier I have. Same question goes for the dana 44 in the front.
 
Reply
Old Mar 6, 2007 | 04:57 PM
  #2  
tdmopar59's Avatar
tdmopar59
Grand Champion
Joined: Feb 2007
Posts: 5,704
Likes: 0
From: Warminster, PA
Default RE: gears

you can get 4.56 gears from www.summitracing.com
http://store.summitracing.com/egnsea...115+4294776360
http://store.summitracing.com/partde...p;autoview=sku
 
Reply
Old Mar 6, 2007 | 05:35 PM
  #3  
974x4's Avatar
974x4
Rookie
Joined: Aug 2006
Posts: 54
Likes: 0
Default RE: gears

410 equals low gear..... you mean you want a lower gear
 
Reply
Old Mar 6, 2007 | 08:57 PM
  #4  
TMS Bill's Avatar
TMS Bill
Record Breaker
Joined: Jul 2006
Posts: 2,400
Likes: 1
From: Warren, NJ
Default RE: gears

Think I saw somewhere that you have to change out the carrier in the D44 if you want 4.10's or lower up there.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 02:36 AM.