How To Install EL Glow White Face Reverse Gauges
Thread Starter
Joined: Jan 2007
Posts: 25
Likes: 0
From:
How To Install EL Glow White Face Reverse Gauges
Has anybody installed EL Glow White Face Reverse Gauges in there ram how hard is it.
[IMG]local://upfiles/53490/6D67625AA62B4371BD2107E65C4B0FBF.jpg[/IMG]
[IMG]local://upfiles/53490/E8C15FF2CA6443E399E0A0D317291969.jpg[/IMG]
[IMG]local://upfiles/53490/6D67625AA62B4371BD2107E65C4B0FBF.jpg[/IMG]
[IMG]local://upfiles/53490/E8C15FF2CA6443E399E0A0D317291969.jpg[/IMG]
Record Breaker
Joined: Nov 2006
Posts: 2,400
Likes: 3
From: fredericktown
RE: How To Install EL Glow White Face Reverse Gauges
mine took like 2 hours i think i used spray adhesive to get them to stick w/o bubbling. the hardest thing is getting your gauges back on and in the correct position.
Champion
Joined: Nov 2006
Posts: 2,902
Likes: 0
From:
RE: How To Install EL Glow White Face Reverse Gauges
ORIGINAL: Sinister
not too hard if you have patience and READ the instructions that come with it.
not too hard if you have patience and READ the instructions that come with it.
Rookie
Joined: Aug 2006
Posts: 55
Likes: 0
RE: How To Install EL Glow White Face Reverse Gauges
it is really easy pop off dash, like 8 screws to take out gauges and clear plastic cover use the tool that comes with them to take outneedles (write down whereneedles were, ecspecially gas) peel off old gauges stick on new gauges, put needles back on, put gauges back in, snapdash back on. and your done.