2nd Gen Ram Tech 1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

Top speeds on gears??

Old Mar 16, 2007 | 01:08 AM
  #1  
mikerados21's Avatar
mikerados21
Thread Starter
|
Veteran
Joined: Jun 2006
Posts: 303
Likes: 0
From:
Default Top speeds on gears??

Okay welli was talking to my friend tonight and he said he was going to put 3.73's in his truck and i told him i was goin to put 4.10's in mine. well he told me i wouildnt be able to go over 100mph??? well can anyone tell me a general idea of top speeds wit the
3.90's
4.10's
and 4.56's

Thnx guys!!!
 
Reply
Old Mar 16, 2007 | 01:40 AM
  #2  
ramchrgr88's Avatar
ramchrgr88
Professional
Joined: Jun 2006
Posts: 184
Likes: 0
From:
Default RE: Top speeds on gears??

gears dont matter if the tire size is bigger. then the gears will just be the same total ratio as stock if you upgraded to a larger tire. even if you went up in gears to a 4.56 without changing tires too much, you will only be running about 5-600 RPM more than with the stock gears.

Besides, why on earth would you take a 5000 lbs. truck over 100. not only is it illegal, but just plain dumb. stopping in a hurry is out of the question, and if you lose any control, you wont spin out like a sports car...you become a tumbleweed.
 
Reply
Old Mar 16, 2007 | 02:43 AM
  #3  
mikerados21's Avatar
mikerados21
Thread Starter
|
Veteran
Joined: Jun 2006
Posts: 303
Likes: 0
From:
Default RE: Top speeds on gears??

ORIGINAL: ramchrgr88

gears dont matter if the tire size is bigger. then the gears will just be the same total ratio as stock if you upgraded to a larger tire. even if you went up in gears to a 4.56 without changing tires too much, you will only be running about 5-600 RPM more than with the stock gears.

Besides, why on earth would you take a 5000 lbs. truck over 100. not only is it illegal, but just plain dumb. stopping in a hurry is out of the question, and if you lose any control, you wont spin out like a sports car...you become a tumbleweed.
Well I do run my truck at a local drag strip against other stock ones so im tryin to make it were i can race it on the drag strip alot cause i got another truck i drive for daily. my ram had uprgraded cross drilled rotors (Baer) and bettercalipers and brake pads. its about to get lowered a little bit. then tubbed out. its already got a roll cage and 5 pt. harness cause it manditory for the track. so im just curious if it would do over 100 wit 4.10's
 
Reply
Old Mar 16, 2007 | 07:02 PM
  #4  
ramchrgr88's Avatar
ramchrgr88
Professional
Joined: Jun 2006
Posts: 184
Likes: 0
From:
Default RE: Top speeds on gears??

no gears will get over to 100mph in the quater unless you get some serious engine work done. check out rm-indy's page. he has a 5.9L motor and didnt do it until he was supercharged. dont get your hopes of 100 mph in your truck.
 
Reply
Old Mar 16, 2007 | 07:26 PM
  #5  
mikerados21's Avatar
mikerados21
Thread Starter
|
Veteran
Joined: Jun 2006
Posts: 303
Likes: 0
From:
Default RE: Top speeds on gears??

well notr specifically in the quarter lets just say if i were to have it at WOT will it go over 100? Just top speed...
 
Reply
Old Mar 18, 2007 | 04:22 PM
  #6  
DeadLifter's Avatar
DeadLifter
Joined: Sep 2006
Posts: 21
Likes: 0
Default RE: Top speeds on gears??

What are your RPM's at 50 just double that. Mine are around 1,800 at 55 with 4.10's so at a hundred I'd be well under 4,000 RPM's, but I doubt my truck will ever see 100 with me drivin. I'll save that for bikes and cars.
 
Reply
Old Mar 18, 2007 | 06:43 PM
  #7  
mopowar's Avatar
mopowar
Record Breaker
Joined: Feb 2006
Posts: 1,567
Likes: 0
From: Richmond, Va
Default RE: Top speeds on gears??

Check this out:
http://www.f-body.org/gears/

Just plug in the variables and it will tell you what your speed will be at any given rpm
 
Reply
Old Mar 18, 2007 | 07:41 PM
  #8  
junkman306's Avatar
junkman306
Veteran
Joined: Sep 2006
Posts: 297
Likes: 0
From: Sparta
Default RE: Top speeds on gears??

ORIGINAL: mopowar

Check this out:
http://www.f-body.org/gears/

Just plug in the variables and it will tell you what your speed will be at any given rpm
Too bad I don't know my transmission ratio's for each gear.
 
Reply
Old Mar 18, 2007 | 08:19 PM
  #9  
mopowar's Avatar
mopowar
Record Breaker
Joined: Feb 2006
Posts: 1,567
Likes: 0
From: Richmond, Va
Default RE: Top speeds on gears??

Which tranny do you have?
46re=




Gear Ratios


1st
2.45

2nd
1.45

3rd
1.00

4th
0.69
 
Reply
Old Mar 18, 2007 | 09:05 PM
  #10  
junkman306's Avatar
junkman306
Veteran
Joined: Sep 2006
Posts: 297
Likes: 0
From: Sparta
Default RE: Top speeds on gears??

Ithink mine is the 44re.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:56 PM.